Alphanso Martina 8 is a practice bass amplifier suitable for small size room practice. You don’t need to be an expert to operate this amp, perfect choice for beginners. However, Martina 8 will blow your mind with its crystal clear bass and looks (in various colored designs). To understand it’s full capability, here is some overview or primary observation before purchase. For a complete study of the amp, you can download its user manual and look through it. With multiple input facility you don’t need to purchase different amplifiers to practice with backtracks, this one can handle both.
Product Overview
Alphanso Martina 8 has been designed from the modern integrated circuitry. This one is solid-state semiconductor amplifier. Martina 8 is able to handle 2 input signals at a time (one mono and one stereo). 10 watt is good enough for small size room practice with electric basses (recommended) or acoustic basses, with backtracks. Inside this small combo amp, a 6-inch speaker is mounted, and that could bring out very sharp bass tones. Martina 8 amp has its own built-in 2 band tone control that responses upto ±10dB, a stereo input pre-amp and a stereo phone out.
Specification
| Features | |
|
Model: Martina 8 |
Types: Bass Amp |
|
Power: 10 watt
|
Technology: Solid State
|
| Channels | |
|
Input: 2 |
Speakers: 6 inch |
|
Outputs: 3.5mm Stereo |
External Output: None |
| Effects/Controls | |
|
Overdrive: None |
Send/Retrun: None |
|
Equalizer: 2 Band |
Compressor: None |
| Measurements | |
|
Height: 11in / 28cm |
Width: 9in / 22.9cm |
|
Depth: 7in / 17.8cm |
Weight: 3.2kg / 7.1lbs |
Specification
| Features | |||
| Model | Types | Power | Technology |
| Martina 8 | Bass Amp | 10 watt | Solid State |
| Channels | |||
| Input | Speakers | Outputs | External Output |
| 2 | 6 inch | 3.5mm Stereo | None |
| Effects/Controls | |||
| Overdrive | Send/Return | Equalizer | Compressor |
| None | None | 2 Band | None |
| Measurements | |||
| Height | Width | Depth | Weight |
| 11in / 28cm | 9in / 22.9cm | 7in / 17.8cm | 3.2kg / 7.1lbs |
Description :
❶ 1⁄4 inch Mono TRS Jack input. A maximum 3m/10ft instrument cable need to be used. Always use a low noise high quality cable to avoid unexpected hum.
❷ 2 band equalizer control. It’s an active equalizer, so the response is huge. It is not recommended to use in its maximum power. The equalizer responses upto ±10dB on bass and treble. Follow the user manual’s recommendations.
❸ Martina 8 has 2 x 3.5mm stereo channels. The left one can handle upto 1dBV (stereo) auxiliary input. Volume of auxiliary input needs to control from the source. The right one delivers sound to headphones or recording input and can deliver upto 450mW to 45Ω load.
❹ This is master volume which controls the main power amplifier’s sound, that means it works for speaker only. It won’t effect on headphone output.
Additional information:
Power Switch: Martina 8 has a power switch with a red light indicator.
Back panel:
Power Socket: The power cable is removable from the amp and would be needed to change in case of damage.
Warranty :
⚠️ Every Martina 8 product comes with 90 days’ warranty period. For any kind of circuit failure, the warranty will protect your money. But in some cases that won’t be applicable. Let us explain; in case of burns, broken parts or any repair being undertaken; that will void the warranty.
⚡ Electronics are very sensitive products. A slight mistake could cost you an amp; voltage fluctuation, overheat, Humidity or loose connection anything can cause a faulty current situation. In these cases, an amplifier would be needed to repair.
More info
Recommended for you
Alphanso Martina 10
20 watt || Bass Amp
Alphanso SaBeGo 120B
120 watt || Bass Amp
Alphanso Martina 18D
520 watt || Bass Amp